|
Post by Mick on Jun 12, 2011 19:51:24 GMT
Rotten Glenelg for spares. Interior stripped but handles available etc. All the body trim available along with Windows. Im 10 miles north of Lincoln
|
|
|
Post by Mick on Jul 29, 2011 21:14:49 GMT
Finished the flatpacking Was quite bad in the roof and rear above the window. The windows are available, I will get sizes on here, pushbutton cupboard handles, exterior pull handles x4 and thats about it. Im re using a lot of the interior and chassis to sort the other 2 I have..
|
|
|
Post by Graham on Jul 30, 2011 11:56:08 GMT
Great stuff Mick, I am sure you will get a few folks asking for bits.
Michael is looking or a roof light if you have one spare! ( see his latest post.)
|
|
|
Post by Mick on Jul 30, 2011 17:43:50 GMT
Skylight looked ok but was so brittle it shattered when I tried to remove it, it was cracked around the screw holes...
|
|
|
Post by Graham on Aug 1, 2011 14:16:42 GMT
Shame but all too often the case with these Mick, hopefully a replacement for Michael will be found soon.
|
|
snowy
Bronze Member
Posts: 26
|
Post by snowy on Aug 25, 2011 22:42:12 GMT
Hi.. i'm after 3 or 4 push button cupboard handles...do you have any left at all?.. Main door handle lock and key would be handy too. Regards Snowy.
|
|
snowy
Bronze Member
Posts: 26
|
Post by snowy on Aug 25, 2011 22:49:23 GMT
Oh and i need some of the black rubber trim insert with the white stripe... Cheers Snowy
|
|
|
Post by Mick on Aug 27, 2011 18:39:57 GMT
Hi, I have a few handles available but no trim insert. I assume they are the brown plastic ones you need.
|
|
snowy
Bronze Member
Posts: 26
|
Post by snowy on Aug 29, 2011 23:00:14 GMT
Hi. yes bothtypes. the long ones on the doors and the square ones on the bottom cupboards please.
|
|
snowy
Bronze Member
Posts: 26
|
Post by snowy on Sept 4, 2011 12:29:42 GMT
How much for the handles?
|
|
|
Post by Graham on Sept 4, 2011 14:02:40 GMT
Hi Mick, may have someone interested in rear light cluster who is missing one if these are still available can you let me know and I will pass on the info, cheers Graham
|
|
|
Post by richard on Sept 5, 2011 20:56:19 GMT
I have a Glenelg ca 1974 and am looking for a front name plate, the T-line one that sits under the window - lost ours years ago and am trying to keep up to the Thompson standards...
Do you know of any source of the material used to cover the cushions? Ours have lasted well, but dogs have taken their toll...and the two main seats are now badly worn...
|
|
|
Post by Mick on Sept 7, 2011 9:01:31 GMT
Snowy.. I have checked and I have 2 push button handles that are not broken. PM me your address and I will get them sent to you, will sort a price for it all in with you then.
Graham.. I have the rear lights shown in the picture, I dont know how good they are as they are still on the plinths. I can check and remove what they need.
Richard.. I have a rear name plate in good condition would think they are the same, was going to use it on mine but it wont fit. PM me your details. As for seat material, I dont know sorry
|
|